ESP32 Gas & Smoke Detection Alarm System Kit

The ESP32 Gas & Smoke Detection Alarm System Kit is a complete DIY electronics project kit for building a gas and smoke detection alarm system using an ESP32 development board. The kit includes an MQ-2 gas/smoke sensor, DHT11 temperature & humidity sensor, 0.96″ I2C OLED display, buzzer, LEDs, transistors, breadboard, jumper wires, 18650 battery and holder.

The MQ-2 sensor can be used to detect smoke and several combustible gases. The ESP32 processes the sensor readings and can activate the buzzer and LED indicators when programmed detection thresholds are reached. The OLED display can show sensor readings and system status.

Kit Includes

1 × ESP32 Development Board
1 × 830 Point Solderless Breadboard
1 × MQ-2 Gas & Smoke Sensor Module
1 × DHT11 Temperature & Humidity Sensor
1 × 0.96″ OLED I2C Display
2 × BC547 NPN Transistors
2 × BC557 PNP Transistors
2 × Red LEDs
2 × Green LEDs
2 × Blue LEDs
6 × 220Ω Resistors
1 × Buzzer
1 × Micro USB Cable
10 × M-M Jumper Wires
10 × F-M Jumper Wires
10 × F-F Jumper Wires
1 × 3.7V 2000mAh 18650 Li-ion Battery
1 × Single 18650 Battery Holder

Applications

Gas leakage detection projects
Smoke detection projects
ESP32 IoT projects
Smart safety projects
Home automation
Environmental monitoring
DIY electronics
School and college projects
STEM learning

Safety Note: This is an educational and DIY prototype kit. It is not a certified gas or smoke safety device. MQ-2 sensor readings depend on calibration and environmental condition

Smoke Detection Project

ESP32 Gas & Smoke Detection Alarm System Kit